Amps
[Top] [All Lists]

Re: [Amps] Tranformer construction webpages

To: "Lee Buller" <k0wa@swbell.net>, <amps@contesting.com>
Subject: Re: [Amps] Tranformer construction webpages
From: "Carl" <km1h@jeremy.mv.com>
Date: Tue, 23 Feb 2010 18:12:48 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Once you get that figured out Lee, how about a 1500W modulation transformer?

Carl
KM1H


----- Original Message ----- 
From: "Lee Buller" <k0wa@swbell.net>
To: <amps@contesting.com>
Sent: Tuesday, February 23, 2010 5:24 PM
Subject: Re: [Amps] Tranformer construction webpages


> Guys and Gals....
> 
> To me, the hard part was the primary and
> getting that right.  Still need to look at how that is done.  You have
> to have enough wire so it is not a direct short....but not to
> much....so I need to study the math.  This would be a fun project to
> make your own HV transfomers.  The primary is the mystery to me.  U
> have rewound TV xfomers for filament voltages, but figuring the primary
> is not understood by me.
> 
> Lee - K0WA
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>