I used it in a full wave center tap configuration.
Center tap for - (or ground) and 2 strings of diodes. Anode of each string
to each side of center tap (AC), and cathodes connected together for the +
side. I used the 6000 volt tap (3000 volts AC) and had about 4200 volts DC
no load and 3900 or so full load. (500-700 ma).
73
Jim W7RY
On Sun, Feb 21, 2010 at 2:19 PM, Robert Morris <robrk@nidhog.net> wrote:
> On 2/21/10 4:53 PM, James Colville wrote:
>
>> CG 308 and 309 are wonderful transformers. I used a CG308 in a home brew
>> 8877. I used it on RTTY contests at 1500 watts out.
>>
>
> Did you use a full wave bridge and float the CT?
>
> And about five years ago, I did cook it with 300 watts of resistors.
> It's been dry since.
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|