I guess you are unfamiliar with almost all commercial ham amps.
Read a few schematics.
Carl
----- Original Message -----
From: "Bill, W6WRT" <dezrat1242@yahoo.com>
To: <amps@contesting.com>
Sent: Sunday, February 21, 2010 2:18 PM
Subject: Re: [Amps] 120 Hz hum from Henry...
> ORIGINAL MESSAGE:
>
> On Sun, 21 Feb 2010 13:43:04 -0500, "Carl" <km1h@jeremy.mv.com> wrote:
>
>>
>>My 1200W LK-500 SSB/CW amp with 26uF filter has a 400-450V swing on the
>>meter.
>
> REPLY:
>
> That's the smallest filter for a KW+ rig I have seen so far. Most amps
> use something around 50 uF.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|