Amps
[Top] [All Lists]

Re: [Amps] TL-922

To: "James Colville" <jimw7ry@gmail.com>, "Amplifier Reflector" <amps@contesting.com>
Subject: Re: [Amps] TL-922
From: "Carl" <km1h@jeremy.mv.com>
Date: Sun, 14 Feb 2010 22:40:29 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
What kind of a .01?  I wouldnt use mylar or any film cap at HF. A pair of 
.0047 ceramic discs is fine; Ive never smoked one of those even at a lot 
more power than a 922..

Carl
KM1H


----- Original Message ----- 
From: "James Colville" <jimw7ry@gmail.com>
To: "Amplifier Reflector" <amps@contesting.com>
Sent: Sunday, February 14, 2010 10:06 PM
Subject: [Amps] TL-922


> I'm just finished adding QSK to a TL-922.
>
> I also put a .01 6kv at the base of the plate choke. I was tuning the amp 
> on
> 20 meters and the cap blew up and shorted. Blew the fuses before it took 
> out
> the 10 ohm 10 watt resistor I replaced the VHF choke with. BUT I also 
> added
> a .01 6KV at the power supply side of the HV feed through. It survived.
>
>
> What do you think?  A self resonate cap at 14 MHz?
>
> Suggestions?
>
> 73
> Jim W7RY
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>