I should have also stated the loss was measured during transmit, not
receive. Tnx.
Paul, W9AC
----- Original Message -----
From: "Paul Christensen" <w9ac@arrl.net>
To: <amps@contesting.com>
Sent: Friday, February 12, 2010 9:38 AM
Subject: [Amps] Ameritron QSK-5 Insertion Loss
> I'm looking to get some feedback concerning through-line loss of the
> Ameritron QSK-5. Loss is not specified by Ameritron as a function of
> frequency and after recently measuring loss through my unit, I'm seeing
> approximately 1.5 dB on 10m, and 0.8 dB on 40m. For those of you using a
> QSK-5, are these typical loss parameters, assuming the PIN diodes are
> being
> fully biased? The 10m loss is certainly a bit more than I would have
> expected.
>
> Paul, W9AC
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|