Hi to the group...
I waited until now to reply to this one as I've just received my decals for
my front panel from these guys: http://customvinyldecals.com/
I sent them what I wanted, font type, size, colour etc, and they've sent me
a full sheet with everything I asked for. Decals were very easy to apply,
and (in my opinion) finish off the amplifier.
73,
Andy
http://gd0tep.com
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of K1SG@aol.com
Sent: 29 January 2010 21:44
To: amps@contesting.com
Subject: Re: [Amps] Silk screen alternatives
Hi Morrie,
I've used 2 different approaches to panel labeling with recent projects.
The easiest is to simply use something like a Brother labelmaker, and this
works fine where you don't need anything graphically interesting. I use
clear tape, and it stays pretty clear over a painted panel.
For small projects, I've made some pretty snazzy looking panels by setting
the panel up in MS Excel. I use the program to make sure everything is
nicely centered, add background colors as needed, even give myself drilling
markers. Once I've produced the Excel spreadsheet on the computer, I print
out a copy WITHOUT the cell lines visible, and make sure all the pieces
actually fit (measure twice, cut once...). Once I'm satisfied with the
design, I print a final copy in color, take it to my local copy shop and
have it laminated, cut it to size, and use spray adhesive to glue it in
place. Then I can drill the panel as needed and have all the holes line up
properly. The only limitation here is that it works only for panels smaller
than 8.5 x 11", or in extreme cases, 11 x 17". Still, if you have access to
a color printer and laminator that work at 11 x 17, that will cover all but
the mounting slots of most rack panels.
Steve
Steve Gilbert
K1SG
K1SG@AOL.com
508-435-9133
FN42fe
In a message dated 1/29/2010 4:31:47 P.M. Eastern Standard Time,
amps-request@contesting.com writes:
Message: 2
Date: Sat, 30 Jan 2010 10:00:04 +1300
From: ZL2AAA <zl2aaa@paradise.net.nz>
Subject: Re: [Amps] Good amp to buy maybe build?
To: "Fuqua, Bill L" <wlfuqu00@uky.edu>, amps@contesting.com
Message-ID: <00bb01caa126$08488500$6502a8c0@xponeplus>
Content-Type: text/plain; format=flowed; charset=iso-8859-1;
reply-type=original
The biggest problem that I find is getting suitable ,good looking decals
for the front panel.Silk screening for a one off project is not
economical.Letraset nah.I would like to know what other constructors use?
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|