Hi Gary, your transformer was designed to use a filter choke followed by
modest C type filter. With this type filter you should be able to supply
several hundred milliamperes of current.
You might want to compare your transformer with others from that era
considering weight and voltage. You will need an old catalog from UTC, Stancor
or Thordarson to do that.
73,
Gerald K5GW
In a message dated 1/25/2010 1:42:28 P.M. Central Standard Time,
gpatterson53@hotmail.com writes:
I picked up a large maybe 70-80 pound transformer that has only a 115
primary. I measured secondary voltage at about 5200 v. The secondary
resistance is 147 ohms. Am I correct in assuming I wont get much current out
of
this??
GaryW4AF
_________________________________________________________________
Hotmail: Free, trusted and rich email service.
http://clk.atdmt.com/GBL/go/196390708/direct/01/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|