So this Rod loaded Plate choke is sold on the bay. Is this thing meant for
under 2kV are you saying??
I dont see any feedback about it melting down ..
http://tinyurl.com/ydb77bc
Mike
KC7NOA
> Date: Wed, 20 Jan 2010 18:27:06 +0100
> snip
> To: manfred@ludens.cl
> CC: amps@contesting.com
> Subject: Re: [Amps] KK5DR's ferrite loaded
>
> Manfred Mornhinweg wrote :
> >
> > That's right. And in the situation originally described, a plate choke
> > wound on a ferrite rod, the permeability of the material isn't very
> > relevant at all, because the total equivalent permeability of teh entire
> > path is dominated by the air, through which the flux lines have to
> > return. This allows obtaining almost the same inductance with a material
> > having pemeability 10, than with one having 1000! So it's a good case
> > for using a low permeability material, even as low as what's provided by
> > powdered iron. The 43 material with its 850 permeability is certainly
> > out of place here.
> >
> >
> Hi, Manfred,
> You explained why a plate choke wound on a ferrite rod won't be better
> than one wound on the usual ceramic rod.
>
> But on the other hand, a choke wound on a ferrite rod is used as the
> filament choke in the cathode circuit of almost every triode power amp
> design. So it must work very well.
>
> How is this? Is it because the cathode circuit is a low impedance
> circuit and the plate circuit a high-impedance circuit?
>
> Also, the type of ferrite used for the bifilar filament chokes that I
> have seen in most published designs does not seem to be very critical.
> Is it for the same reason?
>
> Would a toroid be better than a rod for the filament choke?
>
> 73
>
> Angel Vilaseca HB9SLV
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_________________________________________________________________
Hotmail: Trusted email with Microsoft’s powerful SPAM protection.
http://clk.atdmt.com/GBL/go/196390706/direct/01/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|