Amps
[Top] [All Lists]

Re: [Amps] BNC HV connectors

To: Amplifier Reflector <amps@contesting.com>
Subject: Re: [Amps] BNC HV connectors
From: RICHARD SOLOMON <w1ksz@q.com>
Date: Thu, 14 Jan 2010 02:56:11 +0000
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Note that they spec them as Mated and Un-Mated !! They look a lot like
the old Amphenol MHV series, but I would need to see them before I
would say they are.

73, Dick, W1KSZ

> From: g3jvc@jcleeve.idps.co.uk
> To: amps@contesting.com
> Date: Thu, 14 Jan 2010 02:25:31 +0000
> Subject: [Amps] BNC HV connectors
> 
> I have noticed that RS Components in the UK www.rswww.com
> <http://www.rswww.com/>   carry the Radiall High Voltage/SHV PET 100 series
> coaxial high voltage chassis and cable connectors, which are rated at 12kv
> 10 amps. These connectors are of the BNC type construction, and they are
> described as "high voltage" BNC connectors to NIM standard ND545 Amendment
> A. I am sure that Radiall products must be available in the USA, where they
> probably originate anyway. 73 John G3JVC.
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
                                          
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>