I am trying to get a old Kenwood TL922 Amp up and running. It did not come
with a power plug (as per the manual) so I am trying to get one to work
with the amp. I have a 30A 240v 3 pole 4 wire outlet Type 14-30R for its
power source.
http://www.levitonproducts.com/catalog/model_278.htm?sid=090AD15A897F54032CDBFDA96D2A3B3A&pid=1208
The TL922 has 3 wires, a green ground and two 'hots' blue and brown (X &
Y). The odd man out is the 'white wire neutral' that is needed on the L
spade of the plug Type 14-30P.
http://www.levitonproducts.com/catalog/model_275-T.htm?sid=090AD15A897F54032CDBFDA96D2A3B3A&pid=1208
I am inclined to just forget about the white wire and stay with the green
ground. Any thoughts, suggestions or warnings?
Thanks
Al
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|