The NT is a severe compromise and a PITA to adjust. With the fragile
3CX800's its
especially critical.
I get several various models in here a year to turn into the standard manual
tune version.
Carl
KM1H
----- Original Message -----
From: <klahaie@centricata.com>
To: <amps@contesting.com>
Sent: Friday, October 09, 2009 2:00 AM
Subject: [Amps] AMP Supply LK800-NTC Tuning?
> I'm helping a friend with his Omega TNY modified LK800-NTC amplifier (the
> 'no tune' or what I call 'fixed tuned' model.
>
> I think it needs the preset tuning adjusted, is there a bulletin or
> service manual for this amplifier??
>
> Looks a little daunting, since half of the capacitors are behind the
> filter cap and rectifier board.
>
> I come to this conclusion since when driving it to 1500ma of plate current
> @ 2700v on key down, it's only putting out about 1500 watts. Last service
> at Omega showed 2.5kw into dummy load.
>
> Something is not right. Not finding a lot of documentation so far.
>
> Any leads out there?
>
> Thanks
>
> Kevin K7ZS
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|