> but how could that possibly be hazardous?
The higher circulating currents will very likely cause
the pi-network coil or bandswitch to fail. But then
the failure will probably be blamed on a parasitic
rather than misuse.
> -----Original Message-----
> From: amps-bounces@contesting.com
> [mailto:amps-bounces@contesting.com] On Behalf Of Bill, W6WRT
> Sent: Saturday, August 29, 2009 8:33 PM
> To: amps@contesting.com
> Subject: Re: [Amps] SB-220 bias question
>
>
> ORIGINAL MESSAGE:
>
> On Sat, 29 Aug 2009 18:02:32 -0400, "Joe Subich, W4TV"
> <lists@subich.com> wrote:
>
> >
> > Running an amplifier in
> >a mis-tuned condition (tune for 1500 W Output and drive
> >to 800 W Out) is hazardous and inefficient.
>
> REPLY:
>
> Inefficient, yes, but how could that possibly be hazardous?
>
> Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|