[Amps] HV Measuring.

[Robert Briggs <vk3zl@bigpond.com>]

G'day all....I am probably the dill of the bunch but to measure the HV 
on my power supplies I measure between the bottom capacitor in the stack 
and ground...8 capacitors, multiply the result by 8 for the HV...Maybe a 
bit rough and ready but safer than probing arount the HT end of the 
stack....

73...Bob VK3ZL..
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps