| To: | dhallam@rapidsys.com |
|---|---|
| Subject: | Re: [Amps] Plate Bypass Capacitor |
| From: | Vic K2VCO <vic@rakefet.com> |
| Date: | Wed, 05 Aug 2009 07:55:38 -0700 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
David C. Hallam wrote: > Manfred, > > Maybe my nomenclature of plate bypass capacitor is incorrect. It is > capacitor connected to the DC feed end Ooops, mistake. It IS the bypass capacitor, not the blocking capacitor. Here 0.001 is probably too little -- I recommend at least 0.01 and if the amp covers 160 meters even 0.05 wouldn't be a bad choice. -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] Plate Bypass Capacitor, Vic K2VCO |
|---|---|
| Next by Date: | Re: [Amps] Plate Bypass Capacitor, Manfred Mornhinweg |
| Previous by Thread: | Re: [Amps] Plate Bypass Capacitor, Vic K2VCO |
| Next by Thread: | Re: [Amps] Plate Bypass Capacitor, Carl |
| Indexes: | [Date] [Thread] [Top] [All Lists] |