Amps
[Top] [All Lists]

Re: [Amps] Simpson 260 question

To: "bill wylde" <k9wxr@mchsi.com>, <valerwin@att.net>, <amps@contesting.com>
Subject: Re: [Amps] Simpson 260 question
From: "Carl" <km1h@jeremy.mv.com>
Date: Mon, 3 Aug 2009 17:47:23 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
The Simpson 270 and Triplett 630 are still in production I believe.

As far as measuring HV I use a no name flea market HV probe and rebuilt the 
internals to work as a 6KV probe with the 20K ohms per volt Simpson or 
Triplett.on the 5 or 6 KV position. Not all Simpsons have a HV position so 
select resistor values accordingly for another scale.

Carl
KM1H



Carl
KM1H
----- Original Message ----- 
From: "bill wylde" <k9wxr@mchsi.com>
To: <valerwin@att.net>; <amps@contesting.com>
Sent: Monday, August 03, 2009 5:19 PM
Subject: Re: [Amps] Simpson 260 question


>I will say the same, Val.  Been needing some
> of that info for years.  Thanks!
>
> Also a lurker here, but know at least one
> character on the list.  Hi, Chas.
>
> I'm an old builder of lotsa things.  Amps
> happens to be one of them.
>
> Bill Wylde
>
>
>>
>> Val:
>>
>> That link to   www.Simpson260.com
>> was just what I needed to find out what batteries
>> are needed in my circa 1961  260!  So from a
>> kind of "lurker", many thanks!
>>
>> - Jim W4ENE
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>