Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] grounding grids

from [Bill, W6WRT] [Permanent Link][Original]
To: AMP <amps@contesting.com>
Subject: Re: [Amps] grounding grids
From: "Bill, W6WRT" <dezrat1242@yahoo.com>
Reply-to: dezrat1242@yahoo.com
Date: Thu, 30 Jul 2009 08:30:57 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
ORIGINAL MESSAGE:

>> How then would you account for the reduced IM products of a tube operated in
>> GG verses the same tube operated in a standard grid driven configuration?

REPLY:

Another possible reason for reduced IMD is the added grid resistor smoothes out
the load over the RF driving cycle, in the sense of a "swamping" resistor,
although in series instead of parallel.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] grounding grids, Bill Fuqua
Next by Date:  Re: [Amps] [ot] Dummy load oil, Paul Decker
Previous by Thread:  Re: [Amps] grounding grids, Ron Youvan
Next by Thread:  Re: [Amps] grounding grids, Gary Schafer
Indexes:  [Date] [Thread] [Top] [All Lists]