>From the article:
> For the primary side, since voltages were under 250 V,
> we used 6-pin AMP connectors and 14 gauge wire.
The article also states the parts list, etc. is available at:
www.arrl.org/files/qst-binaries
A check of the ARRL site reveals:
www.arrl.org/files/qst-binaries/Gilbert%20et%20al%200408.zip
73,
... Joe, W4TV
> -----Original Message-----
> From: amps-bounces@contesting.com
> [mailto:amps-bounces@contesting.com] On Behalf Of RICHARD SOLOMON
> Sent: Wednesday, June 03, 2009 4:38 PM
> To: Amplifier Reflector
> Subject: [Amps] 6 Meter Amp (April 2008 QST) Question
>
>
>
> They remove the Power Transformer and use connectors for the AC Line
>
> and HV AC. The HV AC looks like a 3 or 4 pin Molex, but the
> AC Line (Brown
>
> Connector) is not familiar.
>
> Can anyone tell me what make it is ?
>
>
>
> Thanks, Dick, W1KSZ _______________________________________________
> Amps mailing list
> Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|