Chuck
Check Vital Presentation Concepts for many products that you do the artwork
on your computer and print on standard printer.
Transparent or colored backgrounds, lots of options
Also, there are some neat decal supplies out there, again do on computer and
print a decal
Paul K0UYA
----- Original Message -----
From: "chuck" <ka1mwp@comcast.net>
To: <amps@contesting.com>
Sent: Thursday, February 19, 2009 9:55 AM
Subject: [Amps] equipment faceplates-stencil etc
> In some of my equipemnt building, I always used the small lettering rub
> on's that folks use with thier hobbies.
> they are usually white or black, probably from 1/16" to 1/8" in height and
> all you do is position it where you want it one letter
> at a time and rub them on, after a small coat of nail polish clear to keep
> it intact.
> Where I work, we have Lexan faceplates made for our equipment that in
> quantity isn't a bad price, Having ONE done
> cut and setup its VERY VERY expensive and not wirth doing for my amp,
> which
> is 19" (rack mount wide) by about 11"
> or so in height..(big lexan also)
>
> SO now, with that in mind, what do folks use to letter or display thier
> meter switch led info NICELY..??
>
> Will look at all suggestions!
>
> de KA1MWP
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|