Amps
[Top] [All Lists]

[Amps] power and db

To: "AMPS" <amps@contesting.com>
Subject: [Amps] power and db
From: "Paul Kraemer" <elespe@lisco.com>
Date: Wed, 4 Feb 2009 10:26:09 -0600
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Did I miss something in school? Probably. All the discussions on modifying 
linears for a few more watts seems ridiculous, or at least frivolous. db=10 
log P1 /P2 still applies doesn't it?
Double the actual output power rating of that fine L 4 or SB220 from 1000 w 
to 2000 w will only increase your signal strength on the receiving end by 
3db, 1/2 s unit.
IF you could increase your output fourfold, 4000 watss output (that would be 
illegal) you would only gain one S unit.
Attempt to do either and you will only exponentially increase your problems.
Have all the fun you want but increasing output on a kw linear by a couple 
hundred watts just doesn't improve anything.
Like the man says, work on your antenna where you can make a difference.
And, if you are really disappointed with that L4 or SB220 you could send it 
here. I'd like it just the way it is.
Paul K0UYA 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>