Amps
[Top] [All Lists]

Re: [Amps] Balast Resistor used in Henry PA's

To: "K6QD" <k6qd@cox.net>, <amps@contesting.com>
Subject: Re: [Amps] Balast Resistor used in Henry PA's
From: "Jim W7RY" <w7ry@arrl.net>
Date: Wed, 7 Jan 2009 20:43:02 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
It's called a cone heater.

http://www.process-heating.com/CDA/Archives/580bd902cd4fd010VgnVCM100000f932a8c0____

73
Jim W7RY

----- Original Message ----- 
From: "K6QD" <k6qd@cox.net>
To: <amps@contesting.com>
Cc: <ham_amplifiers@yahoogroups.com>
Sent: Wednesday, January 07, 2009 10:25 AM
Subject: [Amps] Balast Resistor used in Henry PA's


>I am looking for one (or two) ballast resistors (heating element), approx.
> 30Ω cold, that are used in various Henry amps., specifically the 4K-U. 
> They
> are made from helically wound Nichrome wire on a ceramic form.  The 
> resistor
> has a screw-in, light bulb type base.  Any help would be appreciated.
>
> Tks es 73 de Mike K6QD
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>