I'm about to start on a construction project. Looking through my stash of disc
ceramics I came upon about 20 units that have a confusing (to me) marking.
The body color is a dull orange, there is a small red mark on the top, top line
says 103 (which is 10,000 pf, I believe).
The next line down has a capital K. To the right of the K there are three
black spots, in a circle The two on the top are obtuse triangles, one at about
ten o'clock, the other at two o'clock. The third mark is a quadrangle at six
o'clock.
With the aid of a recent handbook, and my LC meter, I've discovered just about
every bit of information I need except the voltage rating.
Could the black dots have anything to do with the voltage rating?
TIA, 73,
Barrie, W7ALW, DN36au,
QRV 6M, 432 & 1296 EME
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|