Amps
[Top] [All Lists]

Re: [Amps] Damage?

To: "Carl" <km1h@jeremy.mv.com>,"Fortra" <fortra@siol.net>, "Robert Kirkland" <alpha76@triton.net>,"amps" <amps@contesting.com>
Subject: Re: [Amps] Damage?
From: Pete Smith <n4zr@contesting.com>
Date: Fri, 25 Jul 2008 14:15:40 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Actually, this may not be as farfetched as all that - if I remember 
correctly, some late-model cars are now using ethernet for their data 
communications between the computer, various sensors, and various 
actuators.  I have no clue as to the degree of built-in EMP protection, 
particularly in vehicles with plastic body panels, or the potential effect 
of RFI.

73, Pete N4ZR

At 10:13 AM 7/25/2008, Carl wrote:
>Must be a Prius (;
>
>Carl
>
>
>----- Original Message -----
>From: "Fortra" <fortra@siol.net>
>To: "Robert Kirkland" <alpha76@triton.net>; "amps" <amps@contesting.com>
>Sent: Friday, July 25, 2008 9:21 AM
>Subject: Re: [Amps] Damage?
>
>
> > Hi Bob,
> >
> > you are kidding, wright??
> >
> > Nermin S58DX
> >
> > ----- Original Message -----
> > From: "Robert Kirkland" <alpha76@triton.net>
> > To: "amps" <amps@contesting.com>
> > Sent: Friday, July 25, 2008 3:10 PM
> > Subject: [Amps] Damage?
> >
> >
> >>I am somewhat worried that 1500 watts from my old Alpha will damage the
> >> electronics in my new car. The antenna is about 75 feet from the garage.
> >> Anyone heard of this happening ?.
> >> Bob, w5pvr
> >>
> >> _______________________________________________
> >> Amps mailing list
> >> Amps@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/amps
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>