----- Original Message -----
From: "Al Waller, K3TKJ" <k3tkj@qsl.net>
To: "Peter Voelpel" <df3kv@t-online.de>
Cc: <amps@contesting.com>
Sent: Wednesday, July 23, 2008 1:24 PM
Subject: Re: [Amps] Bill Orr comment
>
>> I was reading the Bill Orr handbook and on his section about amplifiers
>> he
>> says.....A properly designed grounded grid amplifier should produce 2 to
>> 2.5
>> times the plate dissapation of the tube in output.
>>
>
> I have found that is usually the case. Bill Orr (SK) was far from a
> quack.
>
> I would ask your "guru" :
>
> 1. How long He worked for Eimac?
> 2. How many books/articles/white papers has He written?
> 3. How many times He has won Dayton's Technical Excellence award for his
> contributions to the hobby?
>
> Regards, Al
Absolutely correct.
Bills tube articles in QST and CQ are legendary as well as the Care and
Feeding books.
So who is your "guru" Lou??? Not your buddy in PA I wonder?
Carl
KM1H
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|