If a circlip is what I think, crazy Aussie terms, then you dont want it at
the tube end as it will be a shorted turn. If its a partial turn then its
OK.
Carl
KM1H
----- Original Message -----
From: "robert briggs" <vk3zl@bigpond.com>
To: <amps@contesting.com>
Sent: Sunday, July 20, 2008 6:15 AM
Subject: [Amps] Re choke formers.
> Thanks to all who replied to my query here and via email..There are many
> and varied materials suggested..Meanwhile I went for a deeper scrounge
> into my extensive junkbox and found some old 75 watt 300ohm WW
> resistors..After stripping off the outer coat of ceramic and wire I
> ended up with some nice ceramic choke formers 3/4 dia x 6.5 inches
> long..I will utilise a tight fitting circlip for the start and finish of
> my choke windings..
>
> 73 all.....Bob VK3ZL..
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|