Amps
[Top] [All Lists]

Re: [Amps] Ameritron AL 1200 Step start relay replaced - all OK now.

To: Amps@contesting.com, 'Dave Weiss' <davidhweiss@gmail.com>
Subject: Re: [Amps] Ameritron AL 1200 Step start relay replaced - all OK now.
From: Greg - AB7R <ab7r@cablespeed.com>
Reply-to: ab7r@cablespeed.com
Date: Thu, 12 Jun 2008 16:07:50 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Good news Dave,

I have a couple recent Ameritron acquisitions here (1500 and 811H) and have 
found 
Mike to be easy to contact and always pleasant and ready to help.


-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065


On Thu Jun 12 12:46 , "Dave Weiss"  sent:

>*Thanks to those who helped with this NOISY issue!
>
>The new amp would begin to buzz within about 1 minute of powering it up.  It
>would operate but it sure was VERY noisy.  One call to Mike at Ameritron
>produced a replacement relay.
>
>The surgery took place today and the patient is in the recovery room and is
>sure to survive; best of all, it is QUIET!!
>
>Best 73 to all who made good suggestions.  The Ham community is second to
>none in its ability to help.
>
>
>Dave K3FT*
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>