Amps
[Top] [All Lists]

Re: [Amps] New Amps at Dayton

To: Amps <amps@contesting.com>
Subject: Re: [Amps] New Amps at Dayton
From: "Roger (K8RI)" <sub1@rogerhalstead.com>
Date: Tue, 20 May 2008 18:03:08 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Bob Maser wrote:
> The new Alpha amp that runs a pair of 4CX1000A's is the 8410.  This amp uses 
> a 3.6KVA plate transformer.
>   

The same 4CX-1000A used in the 30-S1?  The one with zero grid dissipation?
That's the tube I've always said I'd never use in anything because it's 
so fragile or have I missed something?
> Also at Dayton Emtron introduced their new DX2B which also uses the 
> 4CX1000A.  They are in the process of introducing the DX3B which will run a 
> pair of the same tube.  Looks like all the manufacturers of amps are 
> scrambling to replace the Russian tubes.  The 4CX1000A can be replaced by 
> the 4CX1500B, which has higher plate dissipation(remember the 30S-1 mod with 
> the high screen voltage?).
>   
Isn't that quite a project? IIRC the 4CX-1000 uses a bayonet socket 
while the 4CX-1500 uses a more conventional socket.

If the Chinese are building lots of tubes are't they building the 3CX 
and 4CX 800's?
Maybe I should consider rebuilding my 2002A, but it doesn't have a heavy 
enough PS for the 4CX1500 let alone the screen supply. <:-))

73

Roger (K8RI)
> Bob W6TR
> ----- Original Message ----- 
> From: "Dennis W0JX" <w0jx@yahoo.com>
> To: "Amplifiers" <amps@contesting.com>
> Sent: Tuesday, May 20, 2008 9:42 AM
> Subject: Re: [Amps] New Amps at Dayton
>
>
>   
>> The only thing that I saw at Dayton worth noting is a change in the 
>> current Alpha 8100.
>>
>>  The finals have been replaced with TWO 4CX1000A's instead of the 
>> 4CX800A7's and the amp has been relabeled either an Alpha 8200 0r 8400 
>> (sorry I tossed the literature and can't remember the exact number).
>>
>>  Anyway, this should be considered a warning to any amp owner who has an 
>> Alpha 91, 99 or 8100, QRO 2500, or ACOM 1000 and 2000A. Alpha said the 
>> supply of GU-74B's is drying up quickly and they made the switch to ensure 
>> availability.
>>
>>  Incidentally, the 4CX1000A's used are NOT Eimac but made by Penta in 
>> China.
>>
>>  73, Dennis W0JX/8
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps 
>>     
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>   

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>