Amps
[Top] [All Lists]

Re: [Amps] Harbach Elec now selling Peter Dahl Xfmrs

To: <amps@contesting.com>
Subject: Re: [Amps] Harbach Elec now selling Peter Dahl Xfmrs
From: "W7RY" <w7ry@arrl.net>
Reply-to: W7RY <w7ry@arrl.net>
Date: Sun, 4 May 2008 12:57:45 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
  ----- Original Message ----- 
  From: Rich Hallman - N7TR 
  To: Rich Hallman - N7TR ; amps@contesting.com 
  Sent: Sunday, May 04, 2008 12:18 PM
  Subject: Re: [Amps] Harbach Elec now selling Peter Dahl Xfmrs


  I just got a reply back from Jeff and he stated due to this specific
  transformer (Ten-Tec Titan 425) having 5 secondary's and multiple layer
  windings, the major price increase is in the cost of the copper wire and
  silicon steel used in the Hipersil cores.  Also....PWD price sheet was
  pretty flat since 2000. Jeff stated most of the other transformers are
  pretty close to the original PWD costs.  

  ----The price of copper is at least 5 times what it was in 2000! 

  I think it's great that the PWD line continues to be available, I just
  will wait to replace the ones in my Titan 425's when they actually fail.

  ----Agreed.

  If you have questions...email Jeff directly off the Harbach web site.
  He has been very responsive to all my questions.

  Thanks...
  Rich

  -----Original Message-----
  From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
  On Behalf Of Rich Hallman - N7TR
  Sent: Sunday, May 04, 2008 8:17 AM
  To: Gudguyham@aol.com; amps@contesting.com
  Subject: Re: [Amps] Harbach Elec now selling Peter Dahl Xfmrs

  I sent a second email to confirm the price, but the first email was
  pretty specific for a replacement Titan 425 transformer the price was
  $550. The specs looked like a cut and paste from the original PWD specs,
  so nothing looked like it changed there.

  Also...PWD web site is still available and has the old prices still
  listed.
  http://www.pwdahl.com/ham%20catalog.htm

  Rich


  From: Gudguyham@aol.com [mailto:Gudguyham@aol.com] 
  Sent: Sunday, May 04, 2008 8:07 AM
  To: Rich Hallman - N7TR; amps@contesting.com
  Subject: Re: [Amps] Harbach Elec now selling Peter Dahl Xfmrs

  In a message dated 5/4/2008 10:02:53 A.M. Eastern Daylight Time,
  rich@n7tr.com writes:
  Prior to the closure of PWD in December, I was going to replace the four
  Titan 425 amp transformers with Peter Dahl.  Cost was around $350 each
  at the end of last year.  Was just quoted $550 for the same transformer.
  I think Ill hold off for now...

  73  Rich
  Hi Rich, Did the prices really go up that high with the change in
  ownership?  You would think that $550.00 wsould buy you at 2 amp CCS
  transformer at 3000vac.  Could there be some mistake?  Lou



  Wondering what's for Dinner Tonight? Get new twists on family favorites
  at AOL Food
  <http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001> .
  _______________________________________________
  Amps mailing list
  Amps@contesting.com
  http://lists.contesting.com/mailman/listinfo/amps


  _______________________________________________
  Amps mailing list
  Amps@contesting.com
  http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>