Ebay Item number: 170209709824
Are these decent bandswitches? They are break-before-make, and not
progressively-shorting. My tank coil is wound for 160m with taps for 80, 40,
and 20. Since I am not running the higher bands (15, 10m) and around 1000w, is
it necessary (or good engineering practice) to use progressively shorted taps?
I also have a larger 3P4T ceramic switch which I could rig up for shorting
unused taps if needed, but the smaller switch above will make a little more
room in the RF compartment.
Thanks,
Steve KK7UV
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|