Unwind about 4 turns and youve moved the resonance.
Carl
KM1H
----- Original Message -----
From: "Vic K2VCO" <vic@rakefet.com>
To: "Wayne Smith" <vo1ta.wayne@yahoo.ca>
Cc: <amps@contesting.com>
Sent: Monday, March 17, 2008 1:30 AM
Subject: Re: [Amps] Ameritron al80a
> Wayne Smith wrote:
>> I burned up the top of the plate choke on my al80a trying to load up
>> on 17m.Still loads up on the other bands. I am wondering if I could
>> replace it with the plate choke from the al80b which is available
>> from Ameritron. I suspect that they are the same.
>
> The AL80B choke is designed to move the series resonance away from 17m.
> It should work and avoid this problem. It wouldn't hurt to check it in
> place with a grid dip meter, if you have one available. Temporarily
> connect a direct short across it (amplifier turned off, of course) and
> any resonance should be at least 1 mHz away from the ham bands.
> --
> 73,
> Vic, K2VCO
> Fresno CA
> http://www.qsl.net/k2vco
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|