The Harbach unit is a second or less which is more than enough time for most
ham linears.
My big supplies use a RC delay of about 5 seconds but some of them go up to
7500V with a 50 MF 10KV oil filled that is bigger than the xfmr.
Carl
KM1H
----- Original Message -----
From: "David Cutter" <d.cutter@ntlworld.com>
To: <amps@contesting.com>; "john" <johnmb@nc.rr.com>
Sent: Friday, February 22, 2008 10:20 AM
Subject: Re: [Amps] Duration of time delay for soft start
> Fixed timers I've heard of are around 5s, auto timers can be just a few
> mains cycles depending on the series resistance and threshold of relays.
>
> David
> G3UNA
>
>
>
>> What is the "typical" if there is such a thing, time delay for a soft
>> start/ step start circuit for a linear? Is it in the ms. range.... ? (I
>> realize this is dependent on the size of the PS filter caps, and the
>> impedance they see too).
>>
>> Just looking for an order of magnitude estimate
>>
>> Thanks
>> John K5MO
>>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|