jeremy-ca wrote:
> I buy mine from All Electronics, usually 12-15A P&B 24V. They have
> socket/solder bases and dust covers. Ive used for years for phased
> verticals and stacked yagis.
I have some of these. They are OK for low-impedance lines, but I am
switching 600-ohm open lines in this case and the contacts are a little
close together for the voltages involved.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|