Hi !
Found this link. Relevant info on hazards of Beryllium oxide.
Seems to be more to it than long term effects ( ?? )
Interested parties should have a look.
http://www.inchem.org/documents/icsc/icsc/eics1325.htm
73's Peter
LA7SL
----- Original Message -----
From: "John Lyles" <jtml@losalamos.com>
To: <amps@contesting.com>
Sent: Sunday, November 18, 2007 6:54 PM
Subject: [Amps] BeO in tubes
> Exactly, BeO is similar to asbestos in that it causes lung tissue damage
> (berylliosis - pardon for spelling) that can eventually develop into
> cancer. Although not in all cases. I know a guy (a ham) who machined it
> for years, and is always short of breath. Its a terrible thing. I believe
> that Eimac included that little red and white note in EVERY tube box, as
> it was probably simpler to do that than to try and get the proper
> notification into the proper tube carton in the shipping department. If
> they had not warned of the hazard, they could have been proven negligent
> in a lawsuit. Reading those notes, they always said something like "this
> tube MAY have BeO ceramic".
>
> There are pegmatite veins (called dikes) in the mountains near my QTH and
> one mine I have visited used to have meter long beryl crystals. In mid
> 1940s the miners extracted microlite, an ore of tantalum and niobium, from
> there. It was used for wartime work for electronic parts and tube elements
> (plates, getters). In the 1950s they extracted beryllium cyclosilicate
> ore. It was the leading beryl producer in North America in 1950-51,
> exceeding 13,000 kg per year. In 1958 the miner working the claim died,
> and production ceased - over 690 tons of 11.2% BeO and 184 tons of 5.5%
> had been shipped from that one mine. Four miners dug and hauled the ore
> out. During the best days, they would bring about about a ton per day by
> hand. A mule named Beryl lived there and stayed in the mine for years.
> Needless to say, there were no dust masks or OSHA/MSHA safety regulations
> then. So most of them had that disease.
>
> A side note, Be was also used in neutron sources and neutron reflectors,
> and some of the early metal came from that same mine, for the Manhattin
> project, according to something I read.
>
>
> Sorry to digress from amplifiers!
> 73
> John
> K5PRO, northern New Mexico
>
>
>
>
>
> Message: 2
>> Date: Sun, 18 Nov 2007 08:51:39 +0000
>> From: Steve Thompson <g8gsq@eltac.co.uk>
>> Subject: Re: [Amps] Misconceptions about hazmat in ham radio equip
>> To: amps@contesting.com
>> Message-ID: <473FFD1B.80502@eltac.co.uk>
>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>
>> John Lyles wrote:
>>
>> > Now for beryllia. It is used in SOME power tubes, not LOTS of them.
>> > Eimac had to include a disclaimer about it with every tube....
>>
>> I'm intrigued by 'had to' - do you know why?
>>
>> It is also in beryllium-copper metal used for EMI gasket material
>>
>> As I understand it: Be metal in BeCu is very safe. Raw Be is
>> nasty, but no-one will encounter it in normal life. BeO is toxic
>> in the same was as asbestos - it's not poisonous, but the
>> particles cause chronic lung irritation that can develop into cancer.
>>
>> Steve
>>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.16.0/1136 - Release Date:
> 17.11.2007 14:55
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|