In a message dated 7/28/2007 11:57:53 AM Eastern Daylight Time,
sanorm@columbus.rr.com writes:
Plan to bring it up on a variac ( its wired for 220). Curious as
opinions on how long it should sit at reduced voltage.
Norm, I've done this many times, I use a variac and I bring the voltage up
to about 500Vdc for about 2 mins, then let it bleed down. Then up to 1000
for 2 mins, then let it bleed down, then up to 1500 and then bleed down. The
up and bleed down reforms the caps. You can do this in about 10 mins thats
all. Lou
************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|