The low output is attributable to the low plate voltage. 3-500Zs are rated
400mA Ip per tube. A pair of them at 2450V (* 800mA) = 1960W input power.
At 60% efficiency, which is about as high as it can possibly be, output
should be 1960*.6 = 1176W.
But methinks that Ep is on the low side. I don't have an L-7, but could
swear the L-4B Ep was more like 2.7 kV key-down...might be related to line
voltage and which transformer tap you're using.
-WB2WIK/6
-----Original Message-----
From: Gary Schafer [mailto:garyschafer@comcast.net]
Sent: Monday, July 23, 2007 9:21 AM
To: amps@contesting.com
Subject: [Amps] Drake amplifier
I have a drake L7 amp.
How much power out do you typically get from a drake L4 or L7 amp? I have 95
watts drive and get just short of 1100 watts on 40 meters.
The amp's wattmeter and a bird wattmeter with a brand new slug agree almost
exactly.
This seems a little low or is that about all that can be expected from the
3-500Z's. They run at 2450 volts on the plates and 230 ma grid current.
Thanks
Gary K4FMX
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|