If the RFParts choke won`t work, the Alpha probably has another smoked
component(s)Bandswitch?Tube shorted? I`m using one of their chokes here in
my modified DTR-2000L (8877)& it works very well with no surprises..Jim
K7RDX..
----- Original Message -----
From: "Dan Hearn" <dhearn@air-pipe.com>
To: "kk4tr" <jdube1@bellsouth.net>; <amps@contesting.com>
Sent: Monday, May 21, 2007 9:11 PM
Subject: Re: [Amps] Replacement plate choke for Alpha 76
> Joe;: Along that line I believe I once saw a mod for the RFC on the 76A as
> it had an undesired resonance on, I believe, 15 or 17m. The guy made a
> single turn of insulated buss wire around the choke. He moved it up and
down
> until the resonance was moved into the CB band so it would work on 15 (
> could have been 17m). If it ever was bought by a CBer smoke would ensue. I
> think the tip was in some small DX magazine, not one of the present
> magazines. FWIW. 73, Dan, N5AR
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
> Behalf Of kk4tr
> Sent: Monday, May 21, 2007 5:56 PM
> To: amps@contesting.com
> Subject: [Amps] Replacement plate choke for Alpha 76
>
>
> Does anyone have a source for a replacement plate choke for an alpha 76.
> The value on this one is 15 MH @ 1 amp. The RF parts version for
> replacement is 225mh @ 1 amp. The rf parts replacvenet has screwed up the
> amp even more!! Now the amp doesn't work at all!! Any Ideas out there??
Oh
> by the way Alpha does not list any replacement for this part on the
> website.
>
> Joe KK4TR
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|