Why do you have the Amp so close to the operating position ? There are no
needed operator controls unless you want to turn it on and off !! I put
mine in the furnace room 20 feet away and remoted everything. I admit the
remote bandswitching is a bit messy if you don't have a matching exciter
with the correct band coding. If you just want to select a few ham bands
you can home brew an interface.
/Ed k2mp
----- Original Message -----
From: "Dave Robinson" <ag8b@chartermi.net>
To: <Amps@contesting.com>
Sent: Wednesday, May 09, 2007 9:41 PM
Subject: [Amps] Harris RF-110A Blower Noise Silencer
>I have created a functional equivalent of the Harris RF-125 Blower noise
>silencer. It is a metal utility box that fits over the blower inlet port.
>The box is 9" x 5" x 6", comes gray painted, and you can buy it from
>Digi-key. If you line it with sound absorption foam (NRF =.7), it
>completely eliminates the high frequency whine from the blower. The
>RF-110A sits two feet away from the operating position now. If anyone is
>interested, I have a 1.56mb zip file that contains a description, an actual
>scale template, and two photos showing installation that I can send you.
>73,
> Dave AG8B
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|