Looking for small footprint 110/220VAC squirrel cage blowers for
several amplifier retrofit projects. The squirrel cage can be about 2-
1/2"-3-1/2" so that the unit will fit a space within the enclosure
that is about 5-3/4" height (from flange to highest point on the
fan). A mounting flange is helpful but not vital. If necessary, the
chassis or the fan nozzle length can be modified to accommodate a
slightly larger unit. Any help would be appreciated. Ron W2CQM/3
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|