I hate to come back to this subject, but I am not sure I understand the
problem. Is the overshoot a product of the ALC outputted from the exciter
to the amp, or is it caused within the transceiver at significantly reduced
power settings.
In either case I should be able to see the overshoot if I put a scope across
the meter in my power meter. Is that correct?.
I currently reduce my FT-1000MKV from 200 to 50 watts, when driving my old
SB-220 amp on CW.
Win, W0LZ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|