Hi Gary
You can look it up on the tube constant current curves in the
datasheet. That should be available online somewhere.
Depending on your Grid or Cathode Bias voltage, pick off the closed
anode current estimate, above 3 kV anode voltage. Not sure if you are
talking zero bias or with a slight bias of 10-20 volts there?
john
K5PRO
>
>Date: Thu, 15 Mar 2007 21:26:09 -0400
>From: "Gary Schafer" <garyschafer@comcast.net>
>Subject: [Amps] 3-400Z ZSAC
>To: "'amps'" <amps@contesting.com>
>Message-ID: <20070316012550.E593F319B34@dayton.contesting.com>
>Content-Type: text/plain; charset="US-ASCII"
>
>Can anyone tell me what the ZSAC should be on a pair of 3-400Z tubes at 3000
>volts?
>
>
>
>Thanks
>
>Gary K4FMX
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|