Bill Fuqua wrote:
> Seems to me that the following measurement is very difficult. I can
> think of a few digital ways to do and get the 1000 Hz resolution or
> better that you would need during a SSB transmission but it is not simple.
>
> 73
> Bill wa4lav
>
>
> At 12:23 PM 3/1/2007 -0800, you wrote:
>> The new rule only requires us to block the
>> range from about 26.001 MHz to 27.999 MHz, which allows us to include 12
>> and 10 M out of the box.
Hi Bill,
I didn't write the original -- I just quoted Eric Swartz's (Elecraft)
message.
However I agree with you. I don't know how they do it with SSB. And of
course, what do you do if you are Ameritron or someone and want to
market a simple amplifier without digital control circuitry? It seems
to me that this rule will mean that "old-fashioned" (cheap) amplifiers
will not be marketable any more!
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|