Use LV position, and why is that Jay? I would agree to get within a
reasonable setting with LV and pop her over to SSB... But why do you say
stay with LV?
BOB DD
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Jay Musikar
Sent: Saturday, March 03, 2007 1:33 PM
To: Win; Amps@contesting.com
Subject: Re: [Amps] Loading SB-220
GA Win -
1. Loading on the WARC Bands must be done in the
CW/Tune Position.
2. Do not operate the amplifier in the SSB position on
the WARC Bands.
3. 17m
Band Switch - 15m
Tune - Top of the 40m markings
Load - 4.0
4. 12m
Band Switch - 10m
Tune - 20m (just left or CCW)
Load - 4.0
The are a number of variation on which Band Switch
Position to use and relative Tune and Load settings.
In either case DO NOT use the SSB postion (HV).
Good Luck es 73,
Jay/AF2C
--- Win <w0lz@winlyn.us> wrote:
> Can someone comment on loading the SB-221 up on 18
> and 24 MHz. using the
> existing band selections. Will the input Z change
> much? Which band switch
> positions to use for each band? At the moment I am
> really only interested
> in 18 MHz. As conditions get better, I will
> probably become interested in
> 24 MHz.
>
> Thank you in advance.
>
> Win, W0LZ
____________________________________________________________________________
________
Finding fabulous fares is fun.
Let Yahoo! FareChase search your favorite travel sites to find flight and
hotel bargains.
http://farechase.yahoo.com/promo-generic-14795097
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|