Good going John, I looked all over tarnation and couldn't find squat on
those things.
I found a place with a bundle in stock however.
BOB DD
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of John T. M. Lyles
Sent: Thursday, February 15, 2007 12:56 PM
To: amps@contesting.com
Subject: [Amps] Seimens SVP tspa
Jim
My old Seimens datasheet shows that to be 145 VDC +/- 20% breakdown,
<750 V impulse breakdown (100 V/us impulse) and <1100 V impulse
breakdown (10,000V/us risetime impulse). It can handle 5000 amps for
a single impulse, with approxiamately 200 shots before failure. Its
AC current rating is 20 Amps RMS when first breakdown (for 11
cycles), discharging 35 amps followon. It should extinguish on the
next zero crossing, so this is only usually 1/2 cycle or so - unless
it is grossely overdriven. It is specifically made for AC
applications, like across AC power circuits for protection. Things
like CATV amplifiers and remote 24VAC systems outdoors, that have ac
power feeder.
As far as knowing the gap measurement, or material, it doesn't say.
It has some 'rare' gas inside but not radioactive as far as I can
tell. Why do you need to know those parameters?
73
John
K5PRO
>
>Message: 5
>Date: Thu, 15 Feb 2007 07:27:40 -0800
>From: "k7rdx" <k7rdx@charter.net>
>Subject: [Amps] Seimens grid/cathode glitch spark gap device
>To: "Amps Amps" <amps@contesting.com>
>Message-ID: <000b01c75115$d500a1e0$0a00a8c0@h8k9n6>
>Content-Type: text/plain; charset="iso-8859-1"
>
>Anyone have specs for the Seimens B1-C145 spark gap? I would like to know
>measurement of gap as well as material device is made from..Thanks in
>advance,Jim K7RDX..
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|