-----Original Message-----
>From: Jerry Muller <k0tv@adelphia.net>
>Sent: Nov 9, 2006 6:07 AM
>To: amps@contesting.com
>Subject: [Amps] Sticky blower
>
Jerry:
Before you go too far with issues about the bearings and so on, check and
see if there is a dropping resistor used to moderate the blower speed.
Perhaps this resistor has changed value over the years.
If the blower has bronze bearings, you may have to soak them with a very
light weight oil also. If it has regular ball bearings, you may have a bad
ball and need replacement.
73 and Happy DXing,
Mike
W2AJI
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|