Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] 4CX1500 class AB1 vs. AB2

from [Peter Voelpel] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: Re: [Amps] 4CX1500 class AB1 vs. AB2
From: "Peter Voelpel" <df3kv@t-online.de>
Date: Fri, 3 Nov 2006 01:48:21 +0100
List-post: <mailto:amps@contesting.com> 
use of a small LED with an optocoupled ALC circuit?

73
Peter

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Gary Schafer

The question still remains, how do you protect the grid of a 4CX type tube
from excess grid current with a stiff bias supply?


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] Class C amp for RTTY contesting..., Peter Chadwick
Next by Date:  Re: [Amps] Class C amp for RTTY contesting..., Robert Chudek - KØRC
Previous by Thread:  Re: [Amps] 4CX1500 class AB1 vs. AB2, Tom W8JI
Next by Thread:  Re: [Amps] 4CX1500 class AB1 vs. AB2, Peter Chadwick
Indexes:  [Date] [Thread] [Top] [All Lists]