The price no doubt would be dependent on the quality of the dummy load
switched in at key-up. :)
73, Keith NM5G
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Mark Hill
Sent: Tuesday, August 15, 2006 9:33 AM
To: amps@contesting.com
Subject: Re: [Amps] Checking for IMD
Colin,
Don't prompt me to start a business making 50 Ohm Morse keys!
(Of course there would be at least two models in the range - one for 100
Watt and one for 1500 Watt - and the word 'miracle' or similar would
doubtless appear somewhere in the ads)!
Regards.
Mark.
------------------------------------------------------------------
At 14:23 15/08/2006, Gudguyham@aol.com wrote:
>
>In a message dated 8/15/2006 9:19:15 A.M. Eastern Standard Time,
>k7fm@teleport.com writes:
>
>Years ago, a friend of mine hooked up a $27,000 Tektronix SA to a 4
>element beam and made a qso on 20 meter cw. Only problem was keying
>it - he had to insert the key in the antenna line.
>
>73, Colin K7FM
>
>
>
>
>If more people used CW we would not be talking so much about IMD. But
>I'd bet we start a big thread on KEY CLICKS. Now, keying the antenna
>for CW is what I call keying the "final stage". Lou
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
*******************************************
Mark Hill - G4FPH
E-mail: g4fph@mjha.co.uk
Current web pages at: www.g4fph.net
Old web pages at: www.qsl.net/g4fph
----------------------------------------------------------------------
Dipoles resonant on 1942 / 3720 / 7085 kHz Three element wire beam coming
soon on 14180 kHz!
----------------------------------------------------------------------
Remember - SIDE for HV safety:
S witch off
I solate
D ump
E arth
*******************************************
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|