Ed,
Probably not ... the filament and grid structure are not changed
and they are the primary factors that effect peak current and
transfer characteristics. The only way a change in Anode would
effect the discussion is if the grid to plate spacing changed
in such a way as to effect gain.
73,
... Joe, W4TV
> -----Original Message-----
> From: amps-bounces@contesting.com
> [mailto:amps-bounces@contesting.com] On Behalf Of Edwin Karl
> Sent: Wednesday, June 28, 2006 8:16 AM
> To: amps@contesting.com
> Subject: Re: [Amps] IM Distortion
>
>
> Does the new graphite tubes change any of the dynamic of the
> discussion? i.e. 3-500Zg. It would appear the supposed extra
> 100 watts of plate dissipation should enable you to "Pump up
> the Volume". Something that post dates the Eimac sheets ...
>
> ed K0KL
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|