Tom,
Yes, those are Cinch Jones and are available from Mouser and Allied
Electronics. They have different styles according to how the pins are turned so
they'll only plug together a certain way. I'd look for Cinch or Cinch Jones at
ebay first as it will most likely be the cheapest. These are still being made
and are the 300 series of connectors. The one with 8 pins is a 308. It has 4
horizontal and 4 vertical pins.
Best,
Will
*********** REPLY SEPARATOR ***********
On 6/27/06 at 1:25 AM Tom Sessions wrote:
>Will,
>
>Thanks for your reply. I will search ebay.
>
>Mine is the square type with FLAT terminals.
>
>Tom K4RV
>
>
>
>----- Original Message -----
>From: "Will Matney" <craxd1@verizon.net>
>To: "Tom Sessions" <radio_k4rv@peoplepc.com>; <amps@contesting.com>
>Sent: Tuesday, June 27, 2006 00:55
>Subject: Re: [Amps] L-4B connector
>
>
>Tom,
>
>I've seen both the 8 and 11 pins on ebay with ready made cords out of
>rotor
>cable which most used. I think they're wired for Heathkit stuff though,
>but
>the guy has single connectors also. I can't remember who made these as you
>can't hardly find them now. The square types with the flat terminlas are
>made by Cinch and available everywhere. If I recall, your's is the round
>type?
>
>Best,
>
>Will
>
>*********** REPLY SEPARATOR ***********
>
>On 6/27/06 at 12:25 AM Tom Sessions wrote:
>
>>I need a connector for my L-4B power supply, the one for the end of the
>>cord
>>that plugs onto the back of the L-4B. It has eight terminals.
>>
>>(1) Anybody got a spare for sale?
>>
>>(2) Where can one be obtained?
>>
>>Thanks/73
>>Tom K4RV
>>
>>_______________________________________________
>>Amps mailing list
>>Amps@contesting.com
>>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|