Amps
[Top] [All Lists]

Re: [Amps] adding second tube to AL1200

To: "Bob Maser" <bmaser@tampabay.rr.com>
Subject: Re: [Amps] adding second tube to AL1200
From: R L Measures <r@somis.org>
Date: Wed, 17 May 2006 20:29:42 -0700
List-post: <mailto:amps@contesting.com>
The funniest thing I ever heard about MFJ-Ameritron amplifiers was  
from the "expert" who designed them, who told me that they don't have  
a glitch resistor because the filter caps Ameritron buys have so much  
internal R that they just don't need one.

On May 17, 2006, at 5:07 PM, Bob Maser wrote:

> All of this proves my point about Ameritron amps.  They make the  
> Heathkit
> amps of yesteryear seems Collinsesque.  When are you newcomer hams  
> going to
> learn that anything that comes from MFJ is junk.  I'm sure the  
> ARRRRGHL
> loves them because they spend a lot on advertising in their s--t  
> magazine.
>
> Bob  W6TR
> ----- Original Message -----
> From: <Gudguyham@aol.com>
> To: <vic@rakefet.com>; <n9iww@verizon.net>
> Cc: <amps@contesting.com>
> Sent: Wednesday, May 17, 2006 6:24 PM
> Subject: Re: [Amps] adding second tube to AL1200
>
>
>>
>> In a message dated 5/17/2006 4:23:10 P.M. Eastern Standard Time,
>> vic@rakefet.com writes:
>>
>> Off the  top of my head, you would probably need an outboard power
>> supply, since  it's doubtful that a larger transformer would fit.   
>> Then
>> you'd need  to change the input network components for half the
>> impedance, and  likewise the output pi-network.  You might not have
>> sufficient range  in tuning/loading capacitors for the low bands  
>> for a
>> reasonable Q.   Of course, Ameritron is known for borderline tank
>> inductors, so you might  have to replace the coils with ones made of
>> larger wire or tubing to  handle the RF current.  And you'll need a
>> bigger filament  transformer.  Probably you'd have to modify the  
>> metering
>> circuits.  Hmm, let's see, did I forget anything?  Oh yes, the   
>> blower
>> capacity will be inadequate.
>>
>> Why don't you just build a new  one?
>> -- 
>> 73,
>>
>>
>>
>> I agree 100% Vic.......not a good idea at all.  73 Louie  W1QJ
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>

R L MEASURES, AG6K. 805-386-3734
r@somis.org



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>