Will Matney wrote:
> Bob,
>
> You know I never did think of that, but your exactly right! A person could
> make a circuit up to do that using a color burst crystal and connecting to
> the cable, but that would be a good size project. Using a small, cheap TV
> with a jack on the back, picking up the color burst signal would be the
> cheapest way.
To check/set oscillators here, I use the OCXO as external input to lock
a synth sig gen, then set the output frequency to put it on top of a BBC
station and time the beat note, I've used both MW and Band 2. It's easy
to get .01ppm match - but you need to know that the station has a decent
reference.
Steve
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|