With 3900 watts you can fry tasty chicken in the dummy load if you use
vegetable oil. Think the FCC would fall for that one???
... I actually had a dummy load filled with vegetable oil. Worked ok but oil
gummed up around the heated metal contact points after a while.
Regards,
N5BIP
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Partain, Chuck
Sent: Monday, February 27, 2006 2:41 PM
To: Bill Turner; amps@contesting.com
Subject: Re: [Amps] figuring tube output impedance
yea they're going to love me.
and I guess with that line of thinking, I should drive home doing 145 in the
40.
-----Original Message-----
From: Bill Turner [mailto:dezrat@copper.net]
Sent: Monday, February 27, 2006 3:37 PM
To: Partain, Chuck; amps@contesting.com
Subject: Re: [Amps] figuring tube output impedance
ORIGINAL MESSAGE:
At 10:36 AM 2/27/2006, Partain, Chuck wrote:
>I run 3.9kv and I'm GUESSING 2 amp.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I'm GUESSING the FCC will be very interested in your amp.
Even at a lousy 50% efficiency that is 3900 watts output.
Bill, W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|